· Hot-Dip Galvanized Elbows/Tees (DN50-DN200):
Zinc layer ≥85μm (industry standard: 65μm), passing 1000-hour salt spray test with zero rust. Pre-machined welding grooves ensure 2.0MPa pressure tolerance and 10-year service life.
· Galvanized Flange Joints (PN16):
Double-sided galvanized with EPDM gaskets, resisting corrosion from cooling water additives. Alignment tools guarantee installation accuracy within ±1mm.
· Steel Lined PE Grooved Tees (DN80-DN150):
Ductile iron body with 3mm PE lining, pH 2-13 chemical resistance. Grooved connections enable tool-free assembly in 3 minutes per joint, eliminating sparks in cleanroom environments.
· Lined Transition Joints:
Seamless carbon steel-to-plastic transitions with extended lining to prevent media contact with metal substrates. FDA-certified NBR gaskets ensure water purity compliance.
· Custom Material Selection: Tailored lining materials (e.g., PO for fluoride-based solutions) based on chemical compatibility analysis.
· Rapid Cross-Border Delivery: Standard components shipped within 72 hours; custom parts produced in 15 days. MOC certification achieved in 30 days.
Total Supply: 2,800 galvanized welding fittings, 1,500 grooved lined fittings, covering 6,000 meters of pipeline.
Efficiency Gains: 40% reduction in installation time compared to traditional methods.
Cost Optimization: 22% lower total cost than fragmented sourcing; maintenance intervals extended from 6 months to 5 years.
Compliance Assurance: All products certified by Vietnam MOC; lined fittings meet GB/T 17219-1998 hygiene standards for electronic-grade water.
Electronics manufacturing demands extreme precision and corrosion resistance. The supplier’s galvanized fittings solved our rust issues in high-humidity environments, while the grooved lined fittings perfectly handled aggressive chemicals. Their cross-material transition joints eliminated longstanding challenges in connecting steel and plastic pipelines. The one-stop procurement model saved us countless coordination efforts, allowing us to complete pipeline commissioning 10 days ahead of schedule.
This project has set a regional benchmark for piping solutions in electronics manufacturing parks, with subsequent implementations at Foxconn's Bắc Ninh Plant and Luxshare Precision's Vietnam Expansion. Our solution demonstrates how galvanized welding and grooved lined fittings synergistically address complex industrial challenges, enabling clients to achieve "corrosion-resistant, reliable, and rapid" project outcomes.
Related Products 
Related Cases 
Other Applications 
