200x Pressure Reducing Valve
The pressure reducing valve will flow up and down with different water pressure. it can supply water downstream according to the user's set pressure, and the water supply pressure is not affected by the import pressure fluctuations and exit flow changes. the pressure reducing guide valve can set downstream pressure value. Its installation improves the difference in pressure in various areas of the same system, and can completely replace the traditional partition water supply form, greatly reducing engineering costs, increasing architectural utilization area, and improving water efficiency.
Overview
The product is designed for high-level ultra-high-rise buildings. it is an ideal product to solve the problem of water for living in high-rise buildings and fire water systems, requiring large flow rate and high sensitivity in various occasions. Its performance is more superior, completely replacing the intermediate water tank, saving the cost of the water tank in the building and expanding the usage area of the building.
Product Features
1. This valve is easy to adjust and operate, with a large adjustment range
2. Excellent performance, the set pressure does not change due to changes in upstream pressure and downstream flow.
3. The action of the valve is adjustable, sensitive and stable.
4. The film is isolated, reliable and has no wearing parts, and has a long service life.
5. Small size and can be installed at any angle.
Technical Specifications
Installation Requirements
It is recommended to install the exhaust valve in the pipe net system,while the pressure reducing valve can work stably.When installing,pay attention to the direction of the valve body and arrow marking. To facilitate maintenance,you should leave a certain amount of space around the pressure reducing valve.The inlet and outlet pressure should not be less than 0.2mpa,less than 0.2mpa voltage stabilization performance has deteriorated (export pressure error is enlarged).
Product Components Materials
| Serial number | Main part | Material | ||||
| 1 | Valve body | QT450 | ||||
| 2 | Sealing ring | Nitrile rubber | ||||
| 3 | Main valve petals | Qt450,copper | ||||
| 4 | Diaphragm pressure plate | Qt450,copper | ||||
| 5 | Valve cover | QT450 | ||||
| 6 | Guide valve,needle type valve | Brass | ||||
| 7 | Spring | Stainless steel | ||||
| 8 | Fasteners | Standard parts | ||||
Product Dimensions
| Specifications(dn) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||||
| Valve length(mm) | 203 | 203 | 216 | 241 | 292 | 300 | 356 | 457 | 533 | 610 | ||||
| Test pressure (mpa) | Shell | 1.5-2.4 | ||||||||||||
| Sealed | 1.1-1.76 | |||||||||||||
| Nominal pressure(mpa) | 1.0-1.6 | |||||||||||||
| Applicable temperature | 0-80℃ | |||||||||||||
| Applicable medium | Water and weakly corrosive fluids | |||||||||||||
